Write Dmg To Usb Pc

Aug 17, 2011  Transmac for Windows (2-week trial) can format USB drives for mac and restore.dmg files to USB drives. Download Transmac and install in Windows. In the right-side panel of Transmac, right click on your USB Drive Format Disk Format with Disk Image (see attached screenshot) Point to your.dmg file and click Open. Like ISO files, DMG files are essentially disk images, which are intended to be used with the Mac operating system. The DMG files normally contain program installation files for Apple system and applications, but they can also be used to hold compressed files. With PowerISO, you can manipulate dmg files on Windows PC. Bootable macOS Catalina USB on Windows 10. Use your USB drive right-click on it and select format disk format this will format the USB drive so that it can be used to store the Mac OS operating system. One thing you need took care of that the USB drive needs in GPT partition in order to work on a Mac computer otherwise it won’t boot.

Apr 08, 2019  Afterward, choose the bootable MacOS image such as macOS High Sierra DMG that you downloaded from the link above and click Open. Now, it’s time to Wait for a few minutes for TransMac to write the DMG to USB, the duration depends on the performance of your PC. Natively, Windows PC do not even 'see' APFS and HFS+ formatted partitions. You could convert the drive to FAT32 or exFAT that both Mac and Windows can read. However, this is impossible if the HFS+ or APFS has over 1T data. What should you do? Here is a tutorial help you read Mac drive on Windows.

  • Products
    For Windows
    Android Manager for Win
    Android Data Recovery
    Phone Transfer for Win
    Android Root Pro
    For Mac
    Android Manager for Mac
    Android Data Recovery Mac
    Phone Transfer for Mac
    More >>>
Home > Resources > Make Bootable USB Installer from DMG
(0 comments)

DMG file is a compressed file format being used widely on Mac computer. Windows OS doesn't natively support DMG disk image files, so if you need to create a bootable USB drive from a DMG file, mostly for bootable Mac OS X or macOS installation USB, you need a special utility to help you complete the task.

There is also the possibility of converting the file into a format more suitable for Windows, which is the ISO file format for disk images. Considering the above, let's look at different ways to create a bootable drive from a DMG file on a Windows computer.

Part 1: Convert DMG to ISO and Make Bootable USB from ISO

Since Windows doesn't offer native support for DMG files, you can first convert the file to ISO. Why? A lot of easier to find an app for making a bootable USB from ISO file. The easy way to do this is to use Command Prompt. Don't be intimidated by the non-GUI environment even if you don't have any experience. If you follow the steps below, you can convert any DMG file to ISO and then create a bootable USB using the converted file.

Step 1: Open Command Prompt by typing cmd in the Run windows and hitting Enter.

Step 2: In the command interface, go to the directory in which the DMG file is saved. You can do this by using the 'cd' command followed by the file path, then pressing Enter. For example, if your disk image is in D: and Command Prompt is currently in 'C:', then type 'd:' (no quotes) and press Enter. If it is in a subfolder, type 'cd subfolder', and so on.

Step 3: Use the following command to convert the DMG file to ISO:

hdiutil convert /path/sourceimagefile.dmg -format UDTO -o /path/targetmage.iso

Step 4: Once the ISO file has been created, you can use a burning tool to create the bootable USB drive. To do that, continue with this guide.

Cons:

  • File damged or broken after conversion.
  • Failed booting from burned USB disk.
  • May not work with the latest DMG file.
  • Complex and take more time.

Part 2: Create Mac OS X Bootable USB Installer from DMG

Androidphonesoft DMG Editor is a powerful software application for Windows that will allow you to manage the non-native DMG format even if you have no experience. The interface is uncluttered, and you can even use the tool to view files, extract them, edit the DMG and even copy it to a disk. The burn function has one of the highest success rates in the industry, which makes this an ideal utility for our purpose.

Created by the talented team of developers at Androidphonesoft, DMG Editor is currently the most intuitive Windows app for handling Apple's disk image format. Each of its functions have been tested on various Windows versions, with different types of DMG files and on different PC brands. This thorough testing means no wasted DVDs or corrupted files. As long as your DMG file is in good shape, you can directly create a bootable disk.

Step 1 Install DMG Editor

Download and install DMG Editor on your Windows PC.

Step 2 Plug in USB Drive

Launch the application and click on the 'Burn' section. You will also see other modules such as Edit, Extract and Copy.

Step 3 Start Burning ISO File to USB

Now import the DMG file by clicking the 'Load DMG' button, and click on 'Burn'.

Create dmg file on windows

In a few moments, your bootable USB flash drive will be ready for use. Since you haven't done any conversion, you can use this directly on a Mac for program installation, which you cannot do with the first method.

Part 3: Create Bootable USB from DMG in Windows Via PowerISO

Another well-known disk image utility is PowerISO. Apart from being ideal for burning ISO files, it can also burn a DMG file to USB to create a bootable drive. There are some settings that you have to keep in mind when burning with this software, but it's easy to get the hang of it once you do it a couple of times.

Step 1: Download PowerISO and install it in your Windows PC. Launch the app and insert a USB drive into a free USB slot in your computer.

Step 2: You can import the DMG file directly by clicking on ‘Burn' in the toolbar or going to Tools >Burn. In the Burn window, select the DMG file from the Source File section.

Step 3:Now review the settings to select the burn speed. The default will be the maximum your hardware can handle, so you can reduce that. You can also choose to finalize the disk and verify it. Finalizing means you can't save any more files on the drive, but it primarily applies to DVDs and CDs. Choosing ‘Verify' will prompt the software to execute an additional process after the burning is done. Any errors in the bootable USB will show up at that point.

Step 4: Now click on 'Burn' and wait for the progress bar to reach 100%. Your bootable USB is now ready.

Cons:

  • Expensive for a single license.
  • Higher failure rate for bootable device.
  • Ugly user interface.

The Bottom Line:

The second two methods are recommended if you don't have much experience working with DMG files, but DMG Editor will appeal to novices and experts alike. The clean interface and minimal user input means a lower chance of errors while creating the bootable media.

How To Make Dmg Bootable

Related Articles

  • Windows 10 Password Crack Remove Windows Admin Password Change Windows Password Bootable Windows USB ISO to USB Tool Create Windows Reset Disk Burn ISO to CD Create Windows Reset Disk More>>>
Copyright © 2015 AndroidPhonesoft. All Rights Reserved. Android is a trademark of Google, Inc

To create a bootable USB drive from a DMG file on Windows, you will need to have the right utility. That's because DMG is not native on Windows. It is the Mac equivalent of an ISO file that has been in use since Apple transitioned from the IMG format with Mac OS X. A DMG file, like ISO, can be used to install macOS operating system or Mac apps. If the Mac computer was broken or crashed and couln't get into the system, but you only have access to a Windows PC, there's still a way to make a bootable macOS install USB on Windows.

This article looks at three applications that you can use to create a bootable USB drive from a DMG file in Windows. All of them have their advantages and disadvantages, which we have highlighted. You can make the best choice for you based on the information provided below. They are in no particular order of preference.

TransMac - Make DMG File Bootable USB on Windows

This is a fairly robust application for creating bootable USB on Windows from a DMG file. However, there's a preparatory step to be executed before you can create the bootable USB drive. The typical disk partition used is MBR, but you will need to do a partition with GPT for this to work. You can do so by executing the diskpart command in Windows CMD. Alternatively, you can do it from within TransMac, as shown in the instructions shown below the next paragraph.

Write Dmg To Usb Windows

Once this is done, you can download TransMac and use the two-week free trial period to get the job done free of cost. You can always upgrade if you like the utility and want to keep using it after the trial period has ended. Once you download and install the application, insert your formatted USB drive and follow the instructions below:

Step 1: If you haven't formatted the USB, right-click on your USB drive in the left panel and select Format Disk for Mac from the contextual menu.

Step 2: Right-click again on the drive in the left panel and this time select Restore with Disk Image.

Step 3 : Select the DMG file and click on Open. Once the process is complete, you can eject the drive and use it on a Mac. To boot from this media, hold down the Option key and fire up your Mac.

Convert DMG to ISO and Create macOS Boot USB from Windows

Since ISO is a better format for Windows, you can also convert the DMG to the ISO format and then use the ISO disk image to create the bootable USB. Please note that you can't boot your Mac from bootable USB made from an ISO file, which means you'll have to convert it back to DMG prior to that. Still, it's an effective way to create bootable media for a Mac computer. Here's how it works:

Usb

Step 1: Once you have the macOS install DMG file on a Windows PC, click on Windows + R to open the run dialog box, and type in CMD, then hit Enter. When the Command Prompt opens up, use the following command to convert the file to ISO:
hdiutil convert /path/sourceimagefile.dmg -format UDTO -o /path/targetmage.iso

Step 2: Download and install UUByte ISO Editor on your PC, insert the USB drive and launch the application.

Step 3: Click Burn button on the main screen and point to the converted ISO file. The drive will be automatically detected and click on Burn icon to burn the ISO to the USB drive.

Once the ISO is burned to the file, you can insert it into a Mac and convert it back into the DMG format. Since you're converting the file twice, there's a chance that the file could get corrupted in the process. If that happens repeatedly, then try this next method.

PowerISO: Make Bootable Mac Install USB on Windows 10/8/7

This Windows utility allows you do create bootable USB from DMG on a PC. You can also edit the DMG or extract the contents, and there's also an option to copy it to a disk. For this particular exercise, we'll show you how to use PowerISO to create a bootable USB drive on Windows without having to convert the disk image into another format like ISO.

Step 1: Download and install the application on your PC.

Step 2: Insert your USB drive and launch PowerISO.

Step 3: In the Tools menu, select 'Create Bootable USB Drive… '. You will need to give admin privileges to the software. Alternatively, you can run the program as admin when you launch it.

Step 4: Select the USB drive in the section called Destination USB Drive.

Step 5: Leave all other default as they are and click on 'Start' to burn DMG to the USB drive.

You should be able to see the progress, and a new popup will appear when the bootable media is ready. You can now eject the media and use it to run the DMG on a Mac computer.

Conclusion:

All of these methods are workable, so select the right one for you based on your level of knowledge and your preference.

Comments are closed.